Sundyne Ansimag centrifugal pump

Sundyne Ansimag sealless magnetically driven centrifugal pump

The sealless magnetically driven centrifugal pump Ansimag is simple in construction, but effective in use. All wetted parts are lined with ETFE. With the Ansimag pumps, it is possible to meter aggressive acids and solutions at temperatures up to 121 ° C. The Ansimag series meets the ASME / ANSI B73.3 standards for sealless magnetically driven centrifugal pumps. Flow rates up to 263 m3/h and heads up to 110 m are possible. Flanges in accordance with DIN EN and an ISO-compliant type are available.

Sundyne Ansimag series

All-purpose magnetically driven centrifugal pumps.

Whether solvents, alcohols, plastics, biofuels or agrochemicals – with the Sundyne Ansimag pump series, all these fluids can be handled. Also applications such as wastewater treatment, acid transfer or metal stains are no problems for the pump.

The Sundyne Ansimag product line has a wide performance spectrum and is available in various standardized external dimensions. Thus, it is possible to replace existing pumps without changing the piping system and plant construction. Of course, the Ansimag series meets all current design and construction requirements.

Sundyne Ansimag centrifugal pump

Good reasons for a Sundyne Ansimag

Sundyne Ansimag pumps are sealless magnetically driven centrifugal pumps with ETFE plastic lining.

Sundyne Ansimag centrifugal pumps

Various performance characteristics

Within the Ansimag pump series, there are different pump types available – KMLF, K Plus, KF, KM and KP. With these types, a wide range of different process requirements can be met. There are many different pump types and sizes for a variety of applications. This also allows the replacement of existing pumps without changing the piping system or plant construction.

Sundyne Ansimag centrifugal pumps

Various performance characteristics

Within the Ansimag pump series, there are different pump types available – KMLF, K Plus, KF, KM and KP. With these types, a wide range of different process requirements can be met. There are many different pump types and sizes for a variety of applications. This also allows the replacement of existing pumps without changing the piping system or plant construction.

ETFE interior lining

Thanks to the selection of materials, the wear parts of the pumps are resistant to high wear and to almost all chemicals. The housing is produced from nodular cast iron and lined with ETFE fluoropolymers. This combination of materials ensures that the housing achieves the mechanical strength of a cast iron pump and the corrosion resistance of a non-metallic pump. This allows aggressive media such as acids and solutions to be processed at temperatures up to 121 °C.

Sundyne Ansimag centrifugal pump
Sundyne Ansimag centrifugal pump

ETFE interior lining

Thanks to the selection of materials, the wear parts of the pumps are resistant to high wear and to almost all chemicals. The housing is produced from nodular cast iron and lined with ETFE fluoropolymers. This combination of materials ensures that the housing achieves the mechanical strength of a cast iron pump and the corrosion resistance of a non-metallic pump. This allows aggressive media such as acids and solutions to be processed at temperatures up to 121 °C.

Sundyne Ansimag centrifugal pump

Sealless design

Because of the sealless design of the Ansimag pump series, the magnetically driven centrifugal pumps are leakage- and emission-free as well as low-maintenance.

Sundyne Ansimag centrifugal pump

Sealless design

Because of the sealless design of the Ansimag pump series, the magnetically driven centrifugal pumps are leakage- and emission-free as well as low-maintenance.

Fully supported shaft

The pumps of the Ansimag series feature one fully supported shaft at each end. These shafts prevent shaft deflection, even when flow rates are very low.

Sundyne Ansimag centrifugal pump
Sundyne Ansimag centrifugal pump

Fully supported shaft

The pumps of the Ansimag series feature one fully supported shaft at each end. These shafts prevent shaft deflection, even when flow rates are very low.

Non-metallic wetted parts

All wetted parts are made of non-metallic materials. Thus, a large range of corrosion agents and solvents can be treated safely.

Compliance with chemical standards

The Sundyne Ansimag sealless magnetically driven centrifugal pumps meet ASME and ANSI B73.3 standards (chemical process norms). An ISO-compliant type is also available. The Ansimag pumps set new global standards for magnetically driven centrifugal pumps.

Innovative design of the casing

The Ansimag pump series displays an innovative design. Because of the innovative rear casing, occurring foucault currents are reduced, so that both heat loss and power consumption are minimized.

Videos about Sundyne Ansimag series

Pump types

The Sundyne Ansimag is available in six different construction types.

Sundyne Ansimag centrifugal pump

Pump type KMLF Low Flow

The Ansimag KMLF Low Flow is ideal for corrosive or acidic applications with very small flow rates in the chemical, specialty chemical, and steel industries. The KMLF Low Flow achieves flow rates up to 9 m³/h at working pressures up to 10.3 bar and heads up to 52 m.

Sundyne Ansimag centrifugal pump

Pump type KMLF Low Flow

The Ansimag KMLF Low Flow is ideal for corrosive or acidic applications with very small flow rates in the chemical, specialty chemical, and steel industries. The KMLF Low Flow achieves flow rates up to 9 m³/h at working pressures up to 10.3 bar and heads up to 52 m.

Pump type K Plus

The Ansimag K Plus is distinguished by the simplicity of its design as well as its high reliability and zero emissions. It achieves a maximum flow rate of 153 m3/h and heads up to 95 m. Handling fluid temperatures from -85 to 120 °C, the pump meters different media from ultrapure water to gasoline or to aggressive or water-polluting substances. The K Plus is ideal for most corrosive or acidic applications in the chemical, specialty chemical, and steel industries.

Sundyne Ansimag centrifugal pump
Sundyne Ansimag centrifugal pump

Pump type K Plus

The Ansimag K Plus is distinguished by the simplicity of its design as well as its high reliability and zero emissions. It achieves a maximum flow rate of 153 m3/h and heads up to 95 m. Handling fluid temperatures from -85 to 120 °C, the pump meters different media from ultrapure water to gasoline or to aggressive or water-polluting substances. The K Plus is ideal for most corrosive or acidic applications in the chemical, specialty chemical, and steel industries.

Sundyne Ansimag centrifugal pump

KF pump type

The KF Ansimag is ideal for most corrosive or acidic applications in the chemicals, special chemicals, steel and process industries. The KF achieves flow rates up to 9 m³/h, a head of 52 m and operating pressures up to 30 bar.

Sundyne Ansimag centrifugal pump

KF pump type

The KF Ansimag is ideal for most corrosive or acidic applications in the chemicals, special chemicals, steel and process industries. The KF achieves flow rates up to 9 m³/h, a head of 52 m and operating pressures up to 30 bar.

KM pump type

The Ansimag KM is ideal for most corrosive or acidic applications in the chemicals, special chemicals and steel industries. The KM can achieve flow rates up to 34 m³/h, a head of 43 m and operating pressures up to 10.3 bar.

Sundyne Ansimag centrifugal pump
Sundyne Ansimag centrifugal pump

KM pump type

The Ansimag KM is ideal for most corrosive or acidic applications in the chemicals, special chemicals and steel industries. The KM can achieve flow rates up to 34 m³/h, a head of 43 m and operating pressures up to 10.3 bar.

Sundyne Ansimag centrifugal pump

Pump type KP

The Ansimag KP is ideal for most corrosive or acidic transfer services in the chemical, and specialty chemical industries. The pump achieves flow rates to 65 m³/h and heads up to 46 m possible.

Sundyne Ansimag centrifugal pump

Pump type KP

The Ansimag KP is ideal for most corrosive or acidic transfer services in the chemical, and specialty chemical industries. The pump achieves flow rates to 65 m³/h and heads up to 46 m possible.

Pump type KV

With ASME / ANSI compliant dimensions, the Ansimag KV is ideal for corrosive or acidic applications in the chemical, specialty chemical, and steel industries. The KV pump achieves flow rates up to 74 m³/h and heads up to 99 m.

Sundyne Ansimag centrifugal pump
Sundyne Ansimag centrifugal pump

Pump type KV

With ASME / ANSI compliant dimensions, the Ansimag KV is ideal for corrosive or acidic applications in the chemical, specialty chemical, and steel industries. The KV pump achieves flow rates up to 74 m³/h and heads up to 99 m.

Performance data

The technical data of the Ansimag pump series varies depending on the pump type and is listed below.

  KMLF Low Flow K Plus KF KM KP KV
Delivery head [m] 3 — 52 6 — 67 26 — 110 2 — 30 2 — 32 8 — 69
Flow rates [m³/h] 0,23 — 9 1 — 153 8 — 263 8 — 27 8 — 52 8 — 59
Max. power [kW] 5,5 22 75 5,5 22 22
Temperature range [°C] -29 — 121 -84 — 120 -30 — 120 -29 — 121 -30 — 120 -30 — 120
Max. working pressure [bar] 10,3 19 30 10,3 19 19
Max. viscosity [cSt] 150 365 365 150 260 260

Industries

Oil & Gas

You can rely on 60 years of experience in the construction of pumps, packages, skids, and systems for onshore and offshore oil and gas production. Take a look at the information now!

Refineries

We have been supplying pumps and systems for distillation plants for processing crude oil for 60 years. Ask our experts for more information!

Petrochemicals

LEWA provides durable pumps and metering systems for various processes in the petrochemical industry. Ask our experts for more information!

Chemicals

LEWA supplies you with individual chemical pumps and customized system solutions for various areas of application in the chemical industry.

Pharma, Life Science & Biotech

LEWA supplies pumps and systems for the pharmaceutical, life sciences, and biotech industries that comply with all hygienic requirements. We're happy to help you!

Food & Beverage

Use LEWA pumps and system solutions for your homogenization processes in the food and beverage industry. Ask our experts for more information!

Other Industries

As specialists in fluid handling, we of course also have experience in many other industries. Simply contact our consultants to find out more!

Applications

Injection of corrosion inhibitor

Corrosion inhibitors for the use in offshore applications Industrial pumps, skids and injection packages for the injection of corrosion inhibitor in piping systems. Ask us for more!

Wet oxidation of waste water

Waste water oxidation For wet oxidation and other industrial metering processes, we recommend our tried-and-tested LEWA diaphragm pumps. Ask our experts for more information!

Extraction with supercritical fluids

Metering of Supercritical fluids for example in the coffee production LEWA provides industrial pumps and systems for processes with supercritical fluids in pharmaceutical, food and beverage industries.

Production of biodiesel

Biofuel production LEWA provides industrial metering systems for producing biodiesel and other biofuels. Consult us!

Downloads

Sundyne Ansimag Family brochure (EN)

Sundyne Ansimag Productoverview
4 MB | pdf | 26.01.2020

Get updates

Subscribe to our newsletter!

Get LEWA insights on products, applications and the business of metering fluids. Subscribe now for free.

Follow us

LEWA is on Linkedin LEWA is on YouTube LEWA is on Instagram
© 2020 LEWA GmbH
© 2020 LEWA GmbH